GL Sciences Inertsil ODS-3 and Inertsil ODS-3V HPLC Columns
All pictures shown are for illustration purpose only. Actual product may vary.
GL Sciences Inertsil ODS-3 is widely used for reliably performance for long established methods in pharmaceutical, and contract research labs. Inertsil ODS-3 has a relatively strong retentivity compared to commercially available ODS columns. In addition, the introduction of higher surface area silica provides high preparative loading capacity without sacrificing peak shape.
Inertsil ODS-3V offers all the outstanding chromatographic benefits of Inertsil ODS-3 with the added benefit of a more thoroughly documented, validated QC procedure consistent with the demands of GLP/GMP compliance. Each Inertsil ODS-3V is delivered with a Manufacturer‘s Validation Certificate showing the detailed results of every QA and QC step in manufacturing. The use of Inertsil ODS-3V columns provides an extra measure of assurance of consistent performance from column to column and batch to batch.
Features
- Based on Inertsil 3 series high purity silica with 100 Å pore size
- Inertsil ODS-3V columns are specifically qualified HPLC columns for GLP/GMP compliance validation
- USP L1 designation
- pH range is 2 - 7.5
- 2 µm columns maximum operating pressure is 800 bar
- 3 µm HP columns maximum operating pressure is 500 bar
- 3, 4 and 5 µm columns maximum operating pressure is 200 bar
- Guard cartridges E with 10 mm length require guard holder part number 5020-08500
- UHPLC guard cartridges require guard holder part number 5020-08630
Specifications
| Inertsil ODS-3 | Inertsil ODS-3V | |
| Silica | 3 Series High Purity Silica Gel | |
| Particle Size | 2 μm, 3 μm, 4 μm, 5 μm, 10 μm | 3 μm, 5 μm |
| Surface Area | 450 m2/g | |
| Pore Size | 100 Å (10 nm) | |
| Pore Volume | 1.05 mL/g | |
| Functional Group | Octadecyl | |
| End-capping | Yes | |
| Carbon Loading | 15% | |
| USP Code | L1 | |
| pH Range | 2 - 7.5 | |
Related Posts
Related Posts
