GL Sciences Inertsil-SIL HPLC Columns
All pictures shown are for illustration purpose only. Actual product may vary.
GL Sciences Inertsil SIL is a pure silica gel column available with either 100 Å or 150 Å pore size. Because of the high quality of the silica gel, Inertsil SIL achieves separation with sharp peaks and provides high column-to-column reproducibility.
Inertsil SIL-100A is the basis for the Inertsil 3-series range from of GL Scineces which places high importance on the silica-gel purity nature of the silanol impurities in the silica gel.
Inertsil SIL-150A is also manufactured using ultra-pure silica gel which contains very low level of metal impurities. Compared to Inertsil SIL-100A, the silica’s surface area is smaller at 320 m²/ g and retentivity of Inertsil SIL-150A is weaker than that of Inertsil SIL-100A.
Features
- Inertsil SIL-100A is based on Inertsil 3 series high purity silica with 100 Å pore size
- Inertsil SIL-150A is based on Inertsil 2 series high purity silica with 150 Å pore size
- USP L3 designation
- pH range is 2 - 7.5
- Maximum operating pressure is 200 bar
- Guard cartridges E with 10 mm length require guard holder part number 5020-08500
Specifications
| Inertsil SIL-100A | Inertsil SIL-150A | |
| Bonded Phase | None | None |
| Silica Type | 3 Series High Purity Silica Gel | 2 Series High Purity Silica Gel |
| Particle Type | Fully Porous | Fully Porous |
| Particle Size | 3 μm, 5 μm | 5 μm |
| Pore Size | 100 Å (10 nm) | 150 Å (15 nm) |
| Pore Volume | 1.05 mL/g | 1.20 mL/g |
| Surface Area | 450 m2/g | 320 m2/g |
| Endcapped | No | No |
| pH Range | 2 - 7.5 | 2 - 7.5 |
| Pressure Limit | 200 bar | 200 bar |
| Hardware | Stainless Steel | Stainless Steel |
| USP Designation | L3 | L3 |
