Thermo Scientific Microvials
All pictures shown are for illustration purpose only. Actual product may vary.
Thermo Scientific microvials are for when you are working with less than 2 mL and need to maximize the injection volume. Thermo Scientific’s SureSTART range of microvials include high recovery vials, total recovery vials, and fixed insert vials with a choice of screw, crimp, or snap tops.
High recovery vials are one-piece microvials which have an internal conical reservoir which collects liquid in a 30uL volume for extraction with a conventional autosampler from a total usable volume of 1.7 mL.
Total recovery vials are one-piece microvials which have a very low residual volume due to a specially shaped deep and narrow inner reservoir which collects the liquid in the base so compatible autosamplers can collect all but 1-2 µL of sample while having a total sample volume of 1.2 mL.
Fixed insert vials remove the need to assemble a vial and insert prior to use. During manufacture the outer vial has a glass micro-insert precisely positioned inside and this is permanently fused to the base of the outer vial. This gives a 12 x 32 mm microvial with a usable volume of 250 µL and a residual volume of 4 µL.
Features
- Level 2 microvials have very low metal content, extractables, and leachables to deliver high quality data with an uninterrupted workflow
- Level 3 microvials are for using with your most valuable samples and analytes prone to glass adsorption to deliver consistent, reproducible results
- All Thermo Scientific SureSTART microvials are dimensionally verified
- Meet all requirements of US, EU, JPN Pharmacopeia
- Seal vials with Thermo Scientific 9 mm screw caps, 11 mm crimp caps, or 11 mm snap caps depending on the vial used
