In-Line Filters from Agilent

All pictures shown are for illustration purpose only. Actual product may vary.
Even small amounts of particulates can clog your column inlet, causing high column backpressure, retention-time shift, resolution loss, and shorter column life. Agilent offers high-pressure in-line filters designed to prevent blockages and extend column lifetime in any HPLC system, available in different dimensions and porosities.
Features
- In-line filters available in 2.1 mm and 4.6 mm frit diameter
- Different porosities from 0.2 µm to 2 µm suit different dispersion needs
- Replaceable frits involve a one-time investment in the filter housing
- Available for Agilent and non-Agilent HPLC instruments
- Designed and manufactured to meet the highest quality requirements
- Jet-weaver mixer with optimized delay volume and highest mixing efficiency
Specifications
-
Description Frit Porosity Frit Inlet ID Comments Part Number Replacement Frits RRLC in-line filter, 4.6 mm, 0.2 µm pore size filter, connecting capillary 0.17 x 90 mm
0.2 µm 4.6 mm max 600 bar 5067-1553 5067-1562 (10pk) RRLC in-line filter, 2.1 mm, 0.2 µm pore size filter, connecting capillary 0.12 x 70 mm
0.2 µm 2.1 mm max 600 bar 5067-1551 5067-1555 (6pk) Low dispersion in-line filter, 2.1 mm, 2 µm pore size filter, connecting capillary 0.12 x 60 mm 2 µm 2.1 mm <1 mL/min 01090-68702 280959-904 (10pk) 0.5 µm 280959-907 (10pk) Universal in-line filter, 4.8 mm, 2 µm, connecting capillary 0.25 x 130 mm
2 µm 4.8 mm 1 - 5 mL/min 01090-68703 01090-27609 (2pk) Semi-prep filter
0.5 µm 12.7 mm 1 - 5 mL/min 5064-8273 5022-2185 (1pk) High pressure semi-prep filter
10 µm 19 mm 5 - 10 mL/min 5022-2165 5022-2166 (10pk) Prep filter
10 µm 3.3 mm 10 - 100 mL/min 5065-4500 - In-line filter for G1311A Recommended when high salt
concentrations are usedG1311-60006 - 1290 Infinity II in-line filter 0.3 µm
2.0 mm 1300 bar 5067-6189 5023-0271 (5pk)