Agilent CP-SimDist UltiMetal GC Columns
All pictures shown are for illustration purpose only. Actual product may vary.
Agilent J&W CP-SimDist UltiMetal performs extended analysis to C120, and is guaranteed to a Tmax of 450°C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53mm ID (megabore) columns, providing trouble-free automation of on-column injection. The special deactivation applied to the UltiMetal surface gives better retention time repeatability than any other high temperature column. This column is designed for ASTM D2887 and the extended D2887 method compliance.
Agilent's UltiMetal columns are engineered to combine the robustness of stainless steel with advanced surface deactivation for excellent peak shape.
This phase is also available in standard fused silica material: CP-SimDist.
Features
- Designed for ASTM D2887 and the extended D2887 method compliance
- Low bleed
- Extended analysis to C120 with maximum temperature of 450°C
- UltiMetal tubing for excellent durability (same id as 0.53mm ID fused silica)
- Excellent retention time repeatability and column lifetime due to special deactivation of UltiMetal surface
Similar Phases: Petrocol EX2887, MXT-2887, Rtx-2887, AC Controls High Temp Sim Dist, AT-2887, ZB-1XT SimDist
This phase is also available in standard fused silica material: CP-SimDist.
A 7 inch cage is the most common GC column format, compatible with Agilent 5890, 6890, 7820, 7890, 8860, and 8890 series GC systems, and all non-Agilent GC systems with a similarly sized oven. The 5 inch cage format is designed for smaller GC ovens e.g. for the Agilent GC 6850.
Specifications
CP-SimDist UltiMetal Temperature Specifications
| ID | 0.53 mm | 0.53 mm |
| Length | 5 – 20 m | 5 – 10 m |
| Film | 0.09 – 1.20 µm | 2.65 – 5.00 µm |
| Temperature Limits |
450/450°C
|
400/400°C
|
Literature
Full range of Agilent Technologies GC columns and applications