Agilent CP-Wax GC Columns

All pictures shown are for illustration purpose only. Actual product may vary.
A wide variety of Agilent J&W CP-Wax GC columns are available for specific applications:
- CP-Wax 51 for Amines: designed for the analysis of C4 – C10 amines, diamines and aromatic amines. The column conforms to EPA method 607.
- CP-Wax 57 CB: unique selectivity, suited for the analysis of alcohols in the brewing and wine/spirits industry. The high inertness of this column offers excellent peak shapes for these very polar compounds, ensuring high precision. The 0.15mm ID version offers a significant gain in analysis speed.
- CP-Wax 57 for Glycols and Alcohols: optimised for the analysis of glycols, diols, and alcohols. It has a unique, high polarity WAX phase that produces symmetrical peaks. The cross-linked and bonded phase delivers robustness and enhanced column lifetime.
- CP-Wax 58 FFAP CB: designed for acidic compounds such as phenols and free fatty acids, both derivatised and underivatised.
- CP-Wax for Volatile Amines and Diamines: delivers symmetrical peaks with C3 – C8 amines and diamines due to basic reagent deactivation, with good inertness towards basic compounds.
Features
CP-Wax 51 for Amines
- Designed for the analysis of C4 – C10 amines, diamines and aromatic amines
- Conforms to EPA method 607
- Symmetrical peaks due to basic reagent deactivation
CP-Wax 57 CB
- High polarity
- Unique phase WAX column
- Industry proven for the analysis of alcohols in the brewing and wine/spirits industry
- Excellent inertness for optimum peak shape of alcohols and glycols
- Offered in 0.15mm ID for significantly high speed throughput
- Improved signal-to-noise ratio for better sensitivity and mass spectral integrity
- Bonded and cross-linked
- Solvent rinsable
- Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency
- Performance Summary shipped with each column
Similar Phases: SUPELCOWAX 10, SUPEROX II, CB-WAX, Stabilwax, BP-20, 007-CW, Carbowax, Rtx-WAX, ZB-WAX
CP-Wax 57 CB for Glycols and Alcohols
- High polarity
- Optimised for the analysis of glycols, diols and alcohols
- Unique phase WAX column
- Symmetrical peaks providing the most accurate results
- Bonded and cross-linked
- Phase delivers robustness and enhanced column lifetime
- Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency
- Performance Summary shipped with each column
CP-Wax 58 FFAP CB
- High polarity
- Highest polarity bonded WAX column for analysing polar compounds
- Nitroterephthalic acid modified polyethylene glycol phase
- Ideal for analysis of acidic compounds, such as phenols, underivatised and derivatised free fatty acids
- Chemically bonded
- Solvent rinsable
- High inertness provides excellent peak shape
- Supplied with an EZ-GRIP to simplify column installation, coupling and operation
Similar Phases: SUPELCOWAX 10, SUPEROX II, CB-WAX, Stabilwax, BP-20, 007-CW, Carbowax, Rtx-WAX, ZB-WAX
CP-Wax for Volatile Amines and Diamines
- Guaranteed analysis of volatile amines and diamines, particularly C3 – C8
- Symmetrical peaks due to basic reagent deactivation
- Good inertness towards basic compounds
Similar Phases: Stabilwax DB
Specifications
CP-Wax 51 for Amines Temperature Specifications
ID | 0.25 mm | 0.53 mm |
Length | 25 m | 25 m |
Film | 0.20 µm | 2 µm |
Temperature Limits | 60 – 260/275°C | 40 – 220/220°C |
CP-Wax 57 CB Temperature Specifications
ID | 0.15 – 0.32 mm | 0.53 mm |
Length | 25 - 60 m | 25 m |
Film | 0.12 – 1.2 µm | 1 - 2 µm |
Temperature Limits | 20 - 200/225°C | 20 - 200/225°C |
CP-Wax 57 CB for Glycols and Alcohols Temperature Specifications
ID | 0.25 mm | 0.53 mm |
Length | 25 m | 25 m |
Film | 0.2 µm | 0.5 µm |
Temperature Limits | 200/200°C | 225/250°C |
CP-Wax 58 FFAP CB Temperature Specifications
ID | 0.2 – 0.32 mm | 0.53 mm |
Length | 25 – 50 m | 15 - 50 m |
Film | 0.2 – 1.2 µm | 0.5 - 2 µm |
Temperature Limits | 20 - 250/275°C | 20 - 250/275°C |
CP-Wax for Volatile Amines and Diamines Temperature Specifications
ID | 0.32 mm | 0.53 mm |
Length | 25 m | 25 m |
Film | 1.2 µm | 2 µm |
Temperature Limits | 220/220°C | 220/220°C |