Agilent CP-Sil 8 CB GC Columns
All pictures shown are for illustration purpose only. Actual product may vary.
Agilent J&W CP-Sil 8 CB is a general purpose phase that incorporates 5% phenyl groups in the dimethylpolysiloxane polymer, giving it slightly higher polarity than CP-Sil 5 CB. This delivers better selectivity for aromatic compounds and makes it the best choice for method development. Equivalent to USP G27 and G36, it shows excellent column-to-column reproducibility and very high column efficiencies.
This phase is also available in UltiMetal material: CP-Sil 8 CB UltiMetal (recommended for working in rugged environments with process or portable instruments).
Features
- (5% phenyl) methylpolysiloxane
- Non polar
- General purpose phase
- Low bleed
- Bonded and cross-linked
- Solvent rinsable
- High column-to-column reproducibility
- Wide range of available dimensions
- Tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency
- Performance Summary shipped with each column
Similar Phases: SPB-5, Rtx-5, BP-5, OV-5, 007-2(MPS-5), SE-52, SE-54, XTI-5, PTE-5, ZB-5, AT-5, MDN-5, ZB-5 Plus
Also available in UltiMetal material: CP-Sil 8 CB UltiMetal (recommended for working in rugged environments with process or portable instruments).
Specifications
CP-Sil 8 CB Temperature Specifications
| ID | 0.15 – 0.32 mm | 0.53 mm |
| Length | 10 – 60 m | 10 – 100 m |
| Film | 0.10 – 5.00 µm | 0.50 - 5.00 µm |
| Temperature Limits | -60 – 300/325°C (5.00 µm)
-60 – 325/350°C (0.40 – 1.20 µm)
-60 – 330/350°C (0.10 – 0.25 µm)
|
-60 – 290/325°C (5.00 µm)
-60 – 305/330°C (1.50, 2.00 µm)
-60 – 315/340°C (1.00 µm)
-60 – 325/350°C (0.50 µm)
|
Literature
Full range of Agilent Technologies GC columns and applications